Page 1 of 1

Siemens C10

PostPosted: 2013 Oct 21, 10:40
by spectreman
Discussion about Siemens C10. Click 'Postreply' to write a comment!

Re: Siemens C10

PostPosted: 2013 Oct 21, 10:42
by spectreman
Hi all.
I just today was given one of these C10 phones in good condition.
But I do not have the charger for it.
Can anyone tell me what the DC output voltage of the mains charger is ?
I am also after a handbook for it, cannot find any at all on the web.
Thanks, Chris.

Re: Siemens C10

PostPosted: 2013 Oct 22, 09:29
by oldmobil
Hello, I've uploaded C10 service manual it writes +6,5V.
C10 has same charger as S6 and S10, I uploaded S6
service manual and pinout too, it writes same charger voltage.

Re: Siemens C10

PostPosted: 2013 Oct 22, 12:46
by spectreman
Ok Peter, thanks very much for the service manual copy !
I have tried inputting the correct volts to the jack on the phone, but it appears the battery is dead, not charging at all.
Connected 3.7v directly to the battery contacts on back of phone, it powers up fine.
Just need to make a new battery pack for it now.
It is sensitive with SIM cards though. One SIM I put in it did not like at all, started to power up then kept turning off by itself.
Another SIM I put in was fine.